Passivation Chemicals

Stainless Steel Passivation, Stainless Steel Pickling, Satara, India

ALLOYS WE SAFELY PASSIVATE
STAINLESS STEEL
ALUMINUM
TITANIUM
BRASS
ZINC & MORE
CUSTOMIZED SOLUTION
PICKLING
PASSIVATION
ABOUT DESCALING
WATER SCALE
PROCESS SCALE

STAINLESS STEEL PASSIVATION

 

The process specified is to "pickle and passivate" - a two step method - in order to create a surface on stainless steel that would be resistant to corrosion. Pickling (or Chemical Descaling) is done to remove scale. Passivation is done to make the surface more passive and corrosion resistant. Passivation is the formation of a hard non-reactive surface film that inhibits further corrosion. This layer is usually an oxide or nitride that is a few atoms thick.

Passivation is a process performed to make a surface passive, i.e., a surface film is created that causes the surface to lose its chemical reactivity. Passivation unipotentializes the stainless steel with the oxygen absorbed by the metal surface, creating a monomolecular oxide film

Passivation is performed when free iron, oxide scale, rust, iron particles, metal chips or other nonvolatile deposits might adversely affect the metallurgical or sanitary condition or stability of the surface, the mechanical operation of a part, component or system, or contaminate the process fluid.

Passivation is performed on clean stainless steel, providing the surface has been thoroughly cleaned or descaled. Since the term "passivation" is used to describe distinctly different operations or processes relating to stainless steels, it is necessary to define precisely what is meant by passivation.

1. Passivation is the process by which stainless steel will spontaneously form a chemically inactive surface when exposed to air or other oxygen-containing environments. Steels containing more than 11% Chromium are capable of forming an invisible, inert or passive, self-repairing oxide film on their surface. It is this passive layer that gives stainless steels their corrosion resistance. If a stainless steel surface is scratched, then more Chromium is exposed which reacts with oxygen allowing the passive layer to reform. However, if a particle of carbon steel is embedded in the scratch then the passive layer cannot reform and corrosion will occur when the metal is wetted or exposed to a corrosive environment.

2. Passivation is the chemical treatment of a stainless steel surface with a mild oxidant such as citric acid passivation solution. This process is to accelerate the process noted above in No. 1.

3. Passivation is the removal of exogenous iron or iron compounds from the surface of stainless steel by means of a chemical dissolution, most typically by a treatment with an citric acid passivation solution that will remove the surface contamination but will not significantly affect the stainless steel itself.

This is necessary because during handling and processing such as rolling, forming, machining, pressing, tumbling, and lapping, particles of iron or tool steel or abrasive particles may be embedded in or smeared on or into the surfaces of stainless steel components. If allowed to remain, these particles may corrode and produce rust spots on the stainless steel. This is due to the formation of a galvanic couple between two dissimilar metals that can promote a corrosive reaction. To dissolve the embedded or smeared iron and prevent this condition, as well as restore the original corrosion-resistant surface, semi-finished or finished parts are given a 'passivation' treatment.

4. Passivation also is accomplished by electropolishing. Electropolishing is an electrochemical process that is a super passivator of stainless steel and results in a more passive surface than the other methods mentioned above

 
REFERENCES
CORROSION
TOTAL PASSIVATION
PASSIVATION TESTS
WELDING & PASSIVATION
ASTM & SPECIFICATIONS
STANDARD SOLUTIONS
ABOUT SPR 3AN
OUR PRODUCT LINE
OTHERS
Office & Works :
Plot No. F -7, Old MIDC, Industrial Area,
SATARA, MAHARASHTRA INDIA - 415 004.
TEL. : + 91 - 2162 - 244430
FAX : + 91 - 2162 - 244730,
Cell : +91 94238 66460
| Stainless Steel | Stainless Steel Manufacturers | surface passive | Passivation Chemicals For Stainless Steel |